Essentials For Choosing And Buying Kitchen Cabinets

Looking at the edge banding of the plate, the sealing edge of the high-quality kitchen cabinet is delicate, smooth, and has a good feel, the sealing line is straight and smooth, and the joint is fine. Professional large factories use linear edge banding machine to complete the process of edge banding, broken head, trimming, chamfering, polishing and other processes at one time, uniform gluing, stable pressure of pressing and pasting edge banding, continuous work of each workstation on the assembly line, and the accuracy of processing dimensions can be adjusted to the most suitable part to ensure the most accurate size. And the workshop-type small factory is glued with a brush, manually pressed and sealed edge, trimmed with a castor knife, polished with a manual polishing machine, due to uneven gluing, so produced? The sealing edge is uneven, the sealing line undulating, and even the sealing edge has a scratching feeling, due to uneven pressure, many places are not firm, it is easy to appear in a short time to open the glue, fall off the phenomenon, once the sealing edge falls off, there will be water ingress, expansion phenomenon, and a large number of formaldehyde and other toxic gases volatilized into the air, causing harm to the human body. 
Second, look at the punching, the current panel furniture is assembled by three-in-one connectors, which requires a lot of positioning holes in the board. The fit and accuracy of the hole position will affect the structural firmness of the kitchen cabinet box. Professional manufacturers use 32 magic multi-row drills to complete a plate edge, several holes on the board surface at a time, these holes are a positioning reference, so that in the fit of the hole position, the accuracy of the size is guaranteed. Small artisanal factories use row drills, and even pistol drills to punch holes. Due to different positioning reference and large dimensional error during positioning, the matching accuracy of the hole position is very large, and even the hole position will not be matched in the process of box combination, so that the combined box size error is large, not a very regular cube, but distorted.
Three look at the cutting board, cutting board is also called the cutting of the board, is the first process of kitchen cabinet production. Large-scale specialized enterprises with electronic cutting saw through the computer input processing size, by the computer control of the size accuracy of material selection, and can process several plates at a time, the performance of the equipment is stable The size accuracy of the plate is very high, the tolerance unit is in microns, and there is no stubble on the board side. And the handicraft workshop small factory with a small manual cutting saw, or even with a woodworking cutting saw to build a simple operation table, with this simple equipment to open the board size error is large, often more than 1 mm, and often appear stubble phenomenon, that is, the plate substrate is exposed.
Four look at the door panel, the door panel is the face of the kitchen cabinet, and the face of the person is as important. Everyone wants to choose a good-looking "face" for their kitchen cabinet? A deformed and distorted "face" is certainly not an option. Due to improper treatment of the substrate and surface technology, the door panel produced by the small factory is easily deformed by moisture.