Bathroom Cabinet Production Process 9 Steps

1. Pick:
Observe the color and age of the wood with the naked eye, according to the number of bathroom cabinets, select suitable materials for different parts of use, the general appearance is neat, the color is beautiful and consistent to make the surface part of the cabinet, and some flaws and nodes must be treated with a special process (such as the node part to be filled with professional filling materials before it can be used for the production of bathroom cabinets) with the back of the cabinet or other inconspicuous parts; If it is found that there is deterioration, deformation or moth, it will be discarded to ensure the consistency of the quality of the bathroom cabinet.
2. Cut:
According to the professional production of work books (customized products according to specially drawn drawings), according to the specific mold, the required materials for different parts are cut into different sizes.
3. Grinding:
The polishing of the wood to remove surface burrs and residual bark and scratches is repeated several times during the production process.
4. Drilling:
Use a variety of professional tools such as professional precision table drills to pre-drill the structural mounting holes of the wood, and the secondary process is professionally designed to ensure that no mounting holes can be seen on the surface of the installed bathroom cabinet.
5. Spell;
Imported raw materials are generally 1000 * 60 * 20MM about wooden strips, to make bathroom cabinet side panels, door panels, bottom panels and other parts must go through the "fighting" process, panel is a more particular process and production accuracy, first of all, the selected and polished wood of the same size side by side to prevent in a specific mold, in the part that needs to be spliced coated with rubber panel, and then use professional fixtures from all around and up and down at the same time to press and fix, keep 24 hours above can; At the same time, in the process of fighting, there are larger surfaces, such as the bottom plate, there will be professional engineers according to the force area and expansion and contraction coefficient to calculate and groove, to prevent the cabinet from deformation in the future use (principle: the joints of the rails and the grooving on the cement pavement).
6. Throw:
The assembled cabinet board with a professional polishing machine for many times, polishing machine has a plane polishing machine, special-shaped polishing machine, spherical polishing machine, irregular polishing machine and manual polishing machine is used to process different shapes of wood, polishing machine has a special classification of first throw and fine throwing at the same time, the polishing wheel used / with the difference between thickness and material, role:
A Remove the resulting panel glue;
B Remove fine burrs from the surface of the wood;
C Polishing also detects whether the surface of the panel is straight;
D polished along the wood grain to make the wood grain more three-dimensional;
E Convenient for painting, etc.